Skip to product information
1 of 1

leprechaun.fx-855

Nanolog Audio WaveFunction Overdrive

Regular price $289.00 CAD
Regular price Sale price $289.00 CAD

WaveFunction Overdrive by Nanolog Audio

 

Shaping of Wave forms is the basis for distortion - the type of shape will determine the type of sound that results. Nanolog Audio introduces The WaveFunction Overdrive, which is designed using the latest in analog components - exclusive Nanolog Devices that operate through Quantum mechanical tunneling, a process that relies on the decay of electronic WaveFunctions into space.


--

[vc_row][vc_column width="1/2"][vc_video link="https://www.youtube.com/embed/JWjc7cO4wXA"][/vc_column][vc_column width="1/2"][vc_column_text]

 

 

 

 

 

 

 

WaveFunction Overdrive by Nanolog Audio

 

 

Shaping of Wave forms is the basis for distortion - the type of shape will determine the type of sound that results. Nanolog Audio introduces The WaveFunction Overdrive, which is designed using the latest in analog components - exclusive Nanolog Devices that operate through Quantum mechanical tunneling, a process that relies on the decay of electronic WaveFunctions into space.

 

OVERVIEW

 

The WaveFunction has a classic but distinctive voice and design, with a lot of tonal flexibility.

In addition to being powered by exclusive Nanolog Device technology, the WFO also features passive treble and bass controls, a wide range of gain, and a ton of volume. This allows your tone to shine through with just the right combination of gain and frequency response, and enables using the WFO as anything from a clean boost to a natural overdrive, to a hairy, gainy beast- all with a unique feel provided by Nanolog Devices.

The WFO features four different clipping configurations to shape the sound waves, providing for classic Germanium or Silicon tones, along with two different Nanolog Devices- different in thickness by 1 nm. Each of these positions provides for a different level of compression and harmonic content, yielding distinct frequency distributions, as well as a different interaction with your pick attack. This level of flexibility provides the ability to tune the type of sound you need.
SPECIFICATIONS

 

Input/Output: ¼” Mono Phone Jack
Power: 9 VDC (centre pin negative, most pedal power supplies will work). Draws 3-11 mA depending on configuration.
Bass Cut: Turning this up (clockwise) will cut the low frequencies passing through the circuit. When NO bass cut is applied (totally counter-clockwise), there will be a lot of bass response. This can work well for low gain settings, or where a thicker, fatter overdriven tone is desired. However, as the gain is turned up, it may be desirable to turn up the bass cut to reduce the prevalence of “mudiness” in the sound. The bass cut control is interactive with the treble cut and gain knobs.
Treble Cut: Turning this up (clockwise) will cut the high frequencies passing through the circuit. When NO treble cut is applied, the full range of high frequencies generated by the source and the overdrive stage will pass through the circuit. Since the overdrive circuit adds harmonic content to the audio signal, as the gain is turned up, it may be desirable to cut more treble. The treble cut is interactive with the bass cut and gain controls.
Gain: Controls the amount of overdrive applied to the signal. This knob has a lot of range, and at low settings will add almost no distortion to the signal- perhaps a touch of compression. At higher settings, a heavily overdriven sound will result, and the amount of distortion generated will also depend on the device selected for waveform shaping and on the treble cut and bass cut settings.
Volume: Controls the output volume of the pedal, and can be adjusted as needed. With gain at low settings, the volume can be used to boost the signal. As the gain increases, the overall apparent volume output will increase.
Clip Toggle: Selects the device that is used to generate overdrive. With Ge, Si, N1, and N2, provides a lot of flexibility in both the tone and feel of the pedal. The Ge setting will provide for a warm, compressed tone. Si will provide a harsher sound, with a more sudden onset of clipping. This setting is useful for cutting through the mix, and will provide the most treble response, and also the most saturation. The N1 setting is a Nanolog Device that provides for a medium amount of gain and compression, but a distinct feel relative to Ge or Si. The N2 is a Nanolog Device that provides more saturation and less compression, with a natural and high level of touch sensitivity.